ABchimie APS AC31 Acrylic Thinner
Harmonization Code : 3814001000 |
Main features
- Formulated for acrylic conformal coatings
- Provides stable evaporation behavior
- Enables viscosity control
Product Description
ABchimie APS AC31 is a specially formulated solvent blend designed for use with all acrylic‑based conformal coatings. It is particularly recommended for thinning acrylic coatings such as ACC11 to achieve optimal application characteristics. APS AC31 provides precise viscosity adjustment for both dip‑coating and spray‑coating processes, ensuring smooth film formation and consistent protective performance.
Product Key Features
- Formulated specifically for acrylic conformal coatings
- Optimized compatibility with ACC11 and similar acrylic coatings
- Enables viscosity control for both dip and spray applications
Applications
- Dilution of acrylic coatings for spray‑gun application
- Viscosity adjustment for dip‑coating processes
ABC-APSAC31
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 weeksPackaging
TDS, SDS & Technical Documents
- APS AC31 TDS
- APS AC31 SDS
Technical Specifications
General Properties
Additional Information
Instructions for Use
Spray Coating
When solvent based coatings are sprayed, the higher pressure at the nozzle forces the solvent within the coating to evaporate. To avoid cob-webbing , extra solvent must be added. APS AC31 should be used at levels of between 2:1 and 1:1 (Coating:Thinners) depending upon the application. To avoid microbubbles in the coating, stand 2 minutes before attempting to spray.
Dip Coating
APS AC31 may be used to maintain the viscosity of acrylic conformal coatings in open tanks used in dip coating processes. Over time the solvent within the coatings evaporates, increasing the viscosity of the coating, and giving a thicker coating. This solvent loss must be replaced to maintain the correct viscosity to give an economical coating thickness. APS AC31 is a flammable solvent blend and should be used in a well ventilated area and all sources of ignition must be avoided.
