HumiSeal 1B31 LTX Acrylic Conformal Coating
Harmonization Code : 3906909090 | Acrylic polymers in primary form Others>Others
Main features
- Available in multiple pre‑blends
- Reduced xylene and toluene
- Low moisture vapor permeability
Product Description
HumiSeal 1B31 LTX is a fast‑drying, single‑component acrylic conformal coating formulated to protect electronic assemblies from moisture, corrosive environments, and particulate contamination. It features a reduced xylene and toluene solvent system to ensure full compliance with GB30981‑2020, which governs VOC and solvent usage for conformal coatings. HumiSeal 1B31 LTX is available in a range of pre‑blended versions designed for use without additional dilution and optimized for various application methods.
Product Key Features
- Reduced xylene and toluene formulation for GB30981‑2020 compliance
- Low moisture vapor permeability
- Available in multiple pre‑blends, ready for use without further dilution. Contact us for more information.
- Pre-blends with Thinner 600 are ideal for enhanced spray application
- Pre-blends with Thinner 789 are ideal for film coater systems. Heated systems may be needed for 120CPS pre-blends, providing improved coating coverage
Applications
- Protection of printed circuit boards (PCBs) exposed to moisture, salt fog, corrosive atmospheres, and particulate contamination
HS-1B31LTX
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 6 weeksPackaging
TDS, SDS & Technical Documents
- 1B31LTX TDS
Technical Specifications
Physical Properties
General Properties
Thermal Properties
Electrical Properties
Additional Information
Additional Information
Conformal coatings can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level. Please contact HumiSeal® for additional information.
HumiSeal® 1B31 LTX Pre-Blends are specifically diluted to a viscosity for immediate use. No additional dilution is required. Customers should establish which Pre-Blend is suitable for their equipment and application method before commercial use. HumiSeal® Technical Support should be contacted if any further advice on Pre-Blends and equipment is required.
