MQP-CR| Micro Quartz Powder 99.97% - Crystalline
Harmonization Code : |
Main features
- ≥99.97% SiO2
- Crystalline form
- Quartz Powder
Product Description
MQP-CR Crystalline Micro Quartz Powder consists of ultra fine crystalline silica particles with a total purity SiO2 content of 99.97%. It is commonly used as an EMC filler for semiconductors and can be used in Copper claded layers to improve its CTE, thermal resistance and reliability.
MQP-CR has fewer ionic impurities and low alpha ray emissions while also maintaining a very high purity. Its ultra fine nature makes it ideal for PCB printing inks. It helps with resistance to scratching and wiping, it lowers the CTE and brings long term reliability to the circuit board.
MQP-CR can finally be used in paints and coatings, assisting with the leveling properties, transparency and weather resistance of the materials. The particle size is adjusted to the customer requirements and can range from 7μm to 75μm (D50).
MQP-CR
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 weeks
Shipping in 8 weeks
Shipping in 8 weeksPackaging
TDS, SDS & Technical Documents
- HBS Silica powder
- MSDSHunterBaySilica1
Technical Specifications
Chemical Properties
Additional Information
Particle Size Analysis
| Microns | % Finer |
| 250 | 99.5 |
| 200 | 75 |
| 180 | 50 |
| 125 | 20 |
| 100 | 3 |
Typical Values. They do Not Represent A Specification
Recently viewed products
PIT1S-T-RL | 1mil Polyimide (Kapton) Tape | Thin Silicone Adhesive with Release Liner
- 1 mil polyimide film
- Silicone adhesive
- >6000V breakdown voltage
HumiSeal 1A33LTX Urethane Conformal Coating
- Fluoresces under UV light for easy inspection and rework
- Available in pre-blended viscosities for immediate use
- Easy application using automated coating systems
HumiSeal 1B31LOC Acrylic Conformal Coating
- Low VOC formulation
- Strong electrical insulation properties
- MIL‑I‑46058C qualified
DCT-PO165 | Polyolefin Die Cutting Tape
- 165 µm film thickness
- UV removable acrylic adhesive
- Gentle adhesion for packaging substrates and glass
PIT1A-ALUM | 1mil Polyimide (Kapton) Film with Sputtered Aluminized Coating and Acrylic adhesive
- 1 mil polyimide film
- Sputtered Aluminized Coating
- >6000V breakdown voltage
BMI-3000 CG Low Cost Bismaleimide (Imide Extended) in Powder Form
- Superior thermal stability
- High adhesion to various substrates
- Hydrophobic toughener
