LINQBOND T242 | Medium Strength Threadlocker
Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg
Main features
- Good adhesion to ferrous and non-ferrous metals
- Good chemical resistance
- Removable
Product Description
LINQBOND T242 is medium strength, general purpose, removable threadlocker for fasteners bettween 1/4" and 3/4" (6 to 20 mm) diameters. It has controlled lubricity for accurate clamp loads and parts can easily be separable using hand-held tools.
LINQBOND T242 is a medium viscosity, medium strength threadlocking adhesives for ferrous and non-ferrous threaded fasteners. Cured performance is consistent with other industrial fastener finishes such as black oxide and zinc plated steel. LINQBOND T242 has good solvent resistance against most industrial solvents and can be used on most metal surfaces including oily steel, stainless steel, aluminum, and zinc-plated metals. It is also formulated to provide a consistent torque-tension relationship across the recommended torque range for grade 5 fasteners.
T242
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 6 weeks
Shipping in 6 weeks
Shipping in 6 weeksPackaging
TDS, SDS & Technical Documents
- TDS_LINQBOND T242
- SDS_LINQBOND T242.docx
Technical Specifications
General Properties
Physical Properties
Additional Information
T242 Cured Properties
| Property | Value | Unit |
| Breakaway Torque Range on Steel (Steel 3/8-16 UNC, M10) |
3.4–11.3 | N⋅m |
| Breakaway Torque on Zinc-plated Surface (Steel 3/8-16 UNC, M10) |
9 | N⋅m |
| Prevail Torque Range on Steel Steel 3/8-16 UNC, M10), depending on surface |
2.9–8.1 | N⋅m |
| Prevailing Torque on Zinc-plated Surface Steel 3/8-16 UNC, M10) |
4.6 | N⋅m |
| Application Temperature | –50 to 150 | °C |
| Solvent Resistance (60 °C) Water, oil, glycol, gasoline, transmission fluid ((Immersion Test) |
80–100% retention of strength | – |
Directions for Use
- Apply adhesive to the male thread. The area does not need to be fully covered with the adhesive to achieve good locking torque.
- Assemble the male and female threads together. Tighten to the desired torque within 5 minutes of assembly.
Curing Information
- Fixture Time: 15-20 mins on zinc, steel, and black oxide finishes
- Full strength: 24 hours
