LINQBOND AD-008MT | Two-component Acrylic-based Adhesive
Harmonization Code : 3907.30.00.85 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
- No surface treatment required
- Excellent chemical resistance
- Zero solvent formulation
Product Description
LINQBOND AD-008MT is a two-component acrylic-based adhesive that does not require treatment. AD-008MT displays excellent adhesion on materials with low surface energy post-curing. This includes polypropylene (PP), polyethylene (PE), thermoplastic opolyolefin (TPO), and metal.
LINQBOND AD-008MT can function as replacements for screws, rivets, plastic welding, and two-step processes, including of chemical etchants, primers, or surface treatments in a wide selection of applications.
Key Features:
- Good handling property after mixing.
- Zero solvent formula and environmentally-friendly
- Excellent chemical and water resistance
Applications
- Bonding of PP, PE, TPO, and metal components
- Replacement for screws, rivets, plastic welding, and two-step adhesive processes
- Structural assemblies requiring water and chemical resistance
- General industrial, automotive, and plastic fabrication applications
AD-008MT
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 12 weeksPackaging
TDS, SDS & Technical Documents
- TDS_LINQBOND AD-008MT
- SDS_LINQBOND AD-008MT
Technical Specifications
General Properties
Electrical Properties
Other Properties
Thermal Properties
Additional Information
Typical Curing Properties
| Property | Magnitude | Units |
| Mix rate (A:B) | 10:1 |
by weight or volume |
| Work Life (25 °C, 0.5 g) | 7 | mins |
| Partially Cure Time @25-33℃ | 2-4 | hrs |
| Full Cure Time @25-33℃ | 18-36 | hrs |
Directions for Use
- When using this product, discard the front end of Part A and Part B. Mix the two parts and coat the product onto the substrate for maximum bonding performance.
- The adhesive should be applied on a clean surface free of dirt, grease, or mold release. In the case that it is coated with such, a simple solvent wipe will suffice.
- Mix thoroughly by volume (10:1 mix ratio) before use.
- After mixing the two parts, the adhesive should be used within its pot life.
- For maximum bonding strength, apply the adhesive evenly to both surfaces that will be joined together.
- For handling information, refer to the attached Technical Data Sheet.
Cartridge Nozzle and Cap Installation Guide
