ED-425PL | One-Part Epoxy Adhesive for Rubber & Plastics
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- Strong adhesion to electronic components
- Excellent toughness
- Low outgassing
Product Description
LINQBOND ED-425PL is a two-component, room-temperature vulcanizing (RTV) epoxy adhesive system engineered for robust adhesion across diverse substrates, including various elastomers, thermoplastics, and sensitive electronic components. Its advanced formulation provides enhanced chemical inertness and resilience against severe environmental stressors. The cured adhesive exhibits exceptional mechanical properties, characterized by superior toughness and high resistance to thermal cycling and thermal shock. The polymerized surface is non-tacky and maintains a high-gloss finish. Furthermore, ED-425PL demonstrates minimal volatile organic compound (VOC) outgassing, making it suitable for applications requiring low contamination. This adhesive system is also optimized for a broad range of general-purpose potting and bonding applications, offering reliable encapsulation and structural integrity.
LINQBOND ED-425PL features a user-friendly 1:1 mix ratio by volume, simplifying dispensing and reducing preparation time. It is fully compliant with international environmental directives, including the RoHS 2011/65/EU Directive, ensuring adherence to regulations on hazardous substances.
Product Applications
- Bonding rubber, plastic, and metal components in harsh environments
- General-purpose potting and encapsulation
ED-425PL
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 12 weeksPackaging
TDS, SDS & Technical Documents
- TDS_LINQBOND ED-425PL
Technical Specifications
General Properties
Thermal Properties
Additional Information
Directions for Use
-
Make sure that the substrate is clean and free of contaminants, such as dirt, grease, or mold release agents. A simple solvent wipe is often sufficient.
-
Thoroughly mix the parts A and B at a 2:1 weight ratio until a homogeneous mixture is formed.
-
Cure time will depend on actual production parts and equipment such as part geometry, materials, bondline thickness and the oven temperature.
-
For maximum bonding strength, apply the adhesive evenly to both surfaces to be joined.
Storage and Handling
Store the container in a cool, dark place, away from direct sunlight. Exposure to sunlight may cause the resin and hardener to yellow. Shelf life when stored at room temperature between 14 and 34 °C is 365 days (12 months). Keep the container sealed and prevent moisture contamination when not in use and be sure to replace the lid immediately after each use.
