LOCTITE ECCOBOND F113SC
Harmonization Code : 3907.30.00.85 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
- Two component
- High Tg
- Fiber optic assembly
Product Description
LOCTITE ECCOBOND F113SC is a two-component epoxy that is formulated for terminating all types of fiber optic connectors. This high Tg and low viscosity product is used to create low stress connections with no pistoning. Its dark blue color (after mixing) allows for easy polishing
LOCTITE ECCOBOND F113SC can operate in temperatures between -60 to 120°C and is typically used for Fiber optic connectors, LED displays, Lenses and Optoelectronic device assembly.
Cure Schedule
- 18 hours @ 25°C or
- 1 hour @ 65°C or
- 15 minutes @ 90°C (for one drop applications)
F113SC
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 30 days
Shipping in 12 weeks
Shipping in 55 daysPackaging
TDS, SDS & Technical Documents
- ECCOBOND F113SC-EN
- 1401773_MSDS_UT_US_EN
Technical Specifications
General Properties
Thermal Properties
Chemical Properties
Physical Properties
Additional Information
How to use
- Carefully clean and dry all surfaces to be bonded
- Remove clamp and thoroughly mix the LOCTITE ECCOBOND F113SC epoxy adhesive system components in the handy BIPAX mixing-dispenser package until color is uniform throughout
- Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use
- Some ingredients in this formulation provided in BIPAX, TRA-PAX and bulk packaging may crystallize when subjected to low temperature storage. A gentle warming cycle of 52ºC for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be redissolved prior to use for best results
Recently viewed products
LOCTITE ECCOBOND FP4526
- Low viscosity
- Excellent wettability
- Hi-Pb and Pb-free applications
LOCTITE ECCOBOND FP4655
- Low stress
- Fine particle filler
- Combine with FP4451
Hysol GR2710 | Gold Epoxy Mold Compound
- For conductive polymer and AO capacitors
- Excellent thin wall crack resistance
- Fast cure for automold equipment
