Hysol GR300S | Black Epoxy Mold Compound
Harmonization Code : 3907.30.00.40 | Epoxy Mold Compounds containing by weight more than 70 % silicon dioxide
Main features
- Low CTE (15 ppm/°C)
- Low stress
- High productivity
Product Description
Hysol GR300S is a black, epoxy molding compound used for optical applications. This partly fused silica filled (77%) product has been designed for optocouplers also knows as photo-couplers, optical isolators, or opto-isolators. It is also used for SMX, SOD, BRG, TO and DIP applications.
Hysol GR300S is a heat curable epoxy with low wire sweep, low stress and a low coefficient of thermal expansion. It has a flammability rating of UL94 V-0.
GR300S
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 12 weeksPackaging
TDS, SDS & Technical Documents
- Hysol Huawei TDS_GR300S_June-2019(1)
Technical Specifications
General Properties
Chemical Properties
Physical Properties
Thermal Properties
Curing Conditions
Additional Information
Storage
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 5°C or below, in closed containers. After removal from cold storage, the material MUST be allowed to come to room temperature, in the sealed container, to avoid moisture contamination. The suggested waiting time for a standard 15 kg carton box is 24 hours.
Recently viewed products
Hysol MG40FS | Black Epoxy Mold Compound
- Designed for PDIP packages
- Excellent HTRB performance
- Ideal for high voltage discrete semiconductors
Hysol GR2821 | Black Epoxy Mold Compound
- Completely Superseded by GR2820
- Ultra-low stress epoxy mold compound
- Thin Wall Crack Resistance
LOCTITE SI 5088
- Straw colored liquid
- UV Cure
- Alkoxy Silicone
LINQCELL GDP340 | 340um Non woven Carbon Paper
- 0.34mm - 340um - 13.4mil
- Non woven
- Highly flexible - Roll form
ODF-10 | Diffusion Agent for LEDs
- Diffusion agent
- Low effect on brightness
- Soft and consistent luminosity
PTM 7900 | Phase Change Pad
- 0.045 Thermal Impedance
- 8.0 Thermal Conductivity
- Pad form
HT 11000 | One part Hybrid Thermal Gel
- Dark Gray
- 11 Thermal Conductivity
- Highest thermal conductivity
