HumiSeal Thinner 701
Harmonization Code : 3814001000 |
Main features
- RoHS Directive 2011/65/EC compliant
- For use with multiple HumiSeal conformal coatings
- Ensures proper viscosity adjustment
Product Description
HumiSeal Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2011/65/EC.
Product Key Features
- Ensures proper viscosity adjustment for HumiSeal conformal coatings
- Fully compliant with RoHS Directive 2011/65/EC.
Applications
- Adjusting viscosity of HumiSeal 1B31LOC, 1B66LOC, 1B73EPA, and 1B73LOC conformal coatings.
HS-T701
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 6 weeksPackaging
TDS, SDS & Technical Documents
- Specialty_Thinners_HumiSeal_Technical_Data_Sheet
- Thinner 701
Technical Specifications
General Properties
Thermal Properties
Additional Information
Directions for Use
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
Handling Precautions
HumiSeal® Thinners are flammable and the following standard safety precautions should be observed:
- Use only in well ventilated areas.
- Protective gloves and goggles should be worn.
- In case of prolonged skin contact, wash with water.
- In case of eye contact, flush with water and contact physician.
- Avoid prolonged breathing of vapors.
- Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters.
- Consult the Safety Data Sheet (SDS) for more specific product information.
Recently viewed products
PIT1S-UT | 1-mil Polyimide (Kapton) Tape with 0.5mil Silicone Adhesive
- 1 mil polyimide film
- 0.5 mil Silicone adhesive
- >6,800V breakdown voltage
HumiSeal Thinner 901
- Low toxicity
- BTX-free
- Compatible with multiple coatings
COOLINQ SG-25 | Graphite heat spreader
- 25um Graphite
- Light weight and flexible
- Excellent thermal conductivity
ED-845CM | Fast-curing Epoxy Adhesive for Electronics Bonding
- Fast-curing
- Excellent adhesion
- High insulation, chemical resistance and anti-vibration
LINQCELL TFP800S | 800um Titanium Fiber Paper
- 0.80mm - 800um - 31.5mil
- 60 - 70% Porosity
- Electrode and Support structure
DMI-3850 | Low outgassing adhesive
- UV Cure
- Space applications
- Virtually no outgassing
