HumiSeal Thinner 903
Harmonization Code : 3814001000 |
Main features
- Slower evaporation rate
- Smoother flow
- Better leveling
Product Description
Consider using HumiSeal Thinner 903 to adjust conformal coating viscosity when improved flow and leveling are required. Thinner 903 has moderate evaporation rate (~1) and higher boiling point, meaning the solvent stays wet longer, which helps coatings self-level for a smoother finish.
Product Key Features
- Slower‑evaporating
- Ideal for smoother flow and better leveling on these conformal coatings
Applications
HS-T903
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 6 weeksPackaging
TDS, SDS & Technical Documents
- 900 Thinner Series
Technical Specifications
General Properties
Thermal Properties
Additional Information
Directions for Use
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
Handling Precautions
HumiSeal® Thinners are flammable and the following standard safety precautions should be observed:
- Use only in well ventilated areas.
- Protective gloves and goggles should be worn.
- In case of prolonged skin contact, wash with water.
- In case of eye contact, flush with water and contact physician.
- Avoid prolonged breathing of vapors.
- Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters.
- Consult the Material Safety Data Sheet (MSDS/SDS) for more specific product information.
Recently viewed products
3M™ Scotch-Weld™ Structural Acrylic Adhesive DP8005
- Room Temperature Cure
- Excellent Water and Humidity Resistance
- Very Good Chemical Resistance
BCP-1631 | Medium voltage Busbar Coating Powder
- 49 kv/mm breakdown voltage
- Specifically formulated for steel
- Thermoplastic Polymer Alloy
ALPHA PoP707 Lead-Free No-Clean Solder Paste
- Fine particle dispersion (<10 µm)
- ROL0 per IPC J‑STD‑004
- Outstanding SIR performance
HumiSeal Thinner 999
- Optimized viscosity control
- RoHS compliant
- High-purity solvent blend
Aculon Nanoproof 3-02
- 2% Fluoroacrylate Solids
- 0-2 - 2 um Thickness
- 3M Novec 1700, 1902 replacement
FM-0421 | Reactive PDMS - Monoterminal Hydroxy
- Mono terminal
- 5,000 g/mol | 70 mPas
- Hydroxy functional group
ALPHA SC-7525 Cleaner
- IPA alternative
- High solvency
- Suitable for manual & immersive methods
ABchimie 6025UV LED Soft Thixotropic Resin
- One component
- UV LED Cure
- Shock Absorbing
3M™ Scotch-Weld™ Epoxy Adhesive 7240 FR
- Long open time for large surface application
- Non-sag properties
- Contains glass beads for thickness control
