TGP 6000PT | Thermal Putty Pad
Harmonization Code : 3824.99.96.99 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included : Other : Other: Other
Main features
- 0.27 Thermal Impedance
- 6.0 Thermal Conductivity
- 0.5 - 5 mm Thickness
Product Description
Honeywell TGP 6000PT Thermally Conductive Putty Pads provide high thermal performance and excellent thermal reliability. The material’s putty-like design enables excellent gap-filling capability for applications with large dimensional variances. Special surface reinforcement enables easier handling for operators during high volume assembly. It comes contained and reinforced within single sided fiber glass and dual liners.
Honeywell TGP 6000PT is naturally tacky and requires no additional adhesive to mate to heat source and heat sink. This product can replace thermal grease and improve dripping and pump out. It is available in thicknesses ranging from 1.0mm to 5.0mm.
Need a thickness below 1mm? Then we recommend our standard Thermal gap pads.
TGP6000PT
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 16 weeksPackaging
TDS, SDS & Technical Documents
- TGP3500PT-8000PTTDS2020v2
- TGP6000PT_SDS
Technical Specifications
General Properties
Thermal Properties
Electrical Properties
Additional Information
Fiberglass Layer Solutions:
Since these are ultra-soft materials, handling during application presented certain challenges. To improve stability and ease of processing, multiple fiberglass reinforcement solutions was added.
We can provide below versions for customers’ consideration.
TGP6000PT: 2 layers of fiberglass
TGP6000PT-01: 1 layers of fiberglass
TGP6000PT-00: No fiberglass
Shelf Life: 12 months at 23±2˚C
Thickness range: 1.0-5.0mm with 0.25mm incremental
Thickness Tolerance: >=1mm, ±10%, 0.5-1mm, ±0.1mm
Recently viewed products
HumiSeal Thinner 905
- For rapid cure applications
- Fast evaporation rate
- For faster recoat process
ABchimie836UV Soft Dual Cure Conformal Coating
- One Component
- Dual Cure (UV and Humidity)
- Excellent Moisture Resistance
PIT1S-UT | 1-mil Polyimide (Kapton) Tape with 0.5mil Silicone Adhesive
- 1 mil polyimide film
- 0.5 mil Silicone adhesive
- >6,800V breakdown voltage
HumiSeal Thinner 901
- Low toxicity
- BTX-free
- Compatible with multiple coatings
COOLINQ SG-25 | Graphite heat spreader
- 25um Graphite
- Light weight and flexible
- Excellent thermal conductivity
ED-845CM | Fast-curing Epoxy Adhesive for Electronics Bonding
- Fast-curing
- Excellent adhesion
- High insulation, chemical resistance and anti-vibration
LINQCELL TFP800S | 800um Titanium Fiber Paper
- 0.80mm - 800um - 31.5mil
- 60 - 70% Porosity
- Electrode and Support structure
DMI-3850 | Low outgassing adhesive
- UV Cure
- Space applications
- Virtually no outgassing
