A1100 | Anti bleed Additive
Harmonization Code : 3910.00.00.90 | Silicones in Primary Forms; Others
Main features
- 0.5%-1% wt
- Metal surfaces
- Excellent bleed control
Product Description
A-1100 is a proprietary non-halogenated additive designed to reduce resin bleed out on a variety of surfaces with minimal or no affect on the adhesion properties of the formulation. It shows excellent results when used in non-metal filled systems after reducing bleed. It is co-curable in free-radical polymerization. It also can enhance the rheological properties of various filled adhesives.
A-1100 is recommended for use as an additive to reduce resin bleed out specifically on metal surfaces and has more acid functionality per molecule then A-1050. The recommended addition of the A-1100 to a formulation is between 0.5% - 1% weight percent of resin. It shows superior bleed control in formulations that contain non-metal fillers such as silica.
A1100
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
No longer available
No longer available
Shipping in 2 weeksPackaging
TDS, SDS & Technical Documents
- DMI - A6265 SDS
- DMI - A6265
Technical Specifications
General Properties
Thermal Properties
Physical Properties
Additional Information
Epoxy Resin Incompatibility
A1100 rely on acid functionality to bond in and prevent bleeding. Unfortunately thiol group react with epoxy resin instead of substrate reducing or even eliminating the resin bleed functionality.
Molecular Weight Estimation
We do not specifically measure the M.W. for this material and instead rely on the average M.W. of the starting material and the functionality (thiol group) that makes the product.
Recently viewed products
LOCTITE ECCOBOND FP0087
- High Tg
- Excellent moisture resistance
- Excellent thermal shock resistance
HLP 2000 | Two part Thermal potting material
- Low Viscosity
- 2.0 Thermal Conductivity
- Room temperature cure
LOCTITE ECCOBOND FP4526
- Low viscosity
- Excellent wettability
- Hi-Pb and Pb-free applications
LOCTITE ECCOBOND FP4655
- Low stress
- Fine particle filler
- Combine with FP4451
Hysol GR2710 | Gold Epoxy Mold Compound
- For conductive polymer and AO capacitors
- Excellent thin wall crack resistance
- Fast cure for automold equipment
