ABchimie526UV Soft Dual Cure Conformal Coating
Harmonization Code : 3208.20.90 | Paints and varnishes that are dispersed or dissolved in a non aqueous medium
Main features
- One Component
- Dual Cure (UV and Humidity)
- Low viscosity
Product Description
ABChimie® 526UV is a transparent urethane acrylate conformal coating designed to provide mechanical and environmental protection to electronic components and assemblies. It features dual-cure technology (UV and humidity), which allows for the complete crosslinking through the entire PCB, even in areas that may be covered by shadow. The coating also allows the PCB to be soldered through without producing toxic gases.
ABChimie 526UV exhibits a low viscosity formulation and can be applied by brush, pad printing, manual spray, and selective coating. The decreased viscosity allows for a very thin thickness of 80-100 microns. The coating cures rapidly under UV light, has no VOCs, and can be applied to high-speed manufacturing processes to increase productivity. ABChimmie 526UV is in full compliance with REACH and RoHS regulations, and has UL94 V0 and UL746E (QMJU2-E308681) certifications.
Product Key Features
- Transparent, thin coverage
- Dual Cure (UV + Humidity)
- Thin film thickness (80 - 100 microns)
- Excellent adhesion to PCBs
- Resists mold growth
- Fast UV cure for high volume production
- No VOCs
- Brush, Spray, Printing, Selective Coating (ideal) applications
- UL94 V0 and UL746E
Applications
- Conformal coating for Printed circuit assemblies
- Protection for plastic casings or covers
- Protection for optically clear applications ex. lenses.
ABC-526UV
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 weeksPackaging
TDS, SDS & Technical Documents
- ABchimie526UV TDS
- ABchimie526UV SDS - DS55
- ABchimie526UV SDS - DS140
Technical Specifications
General Properties
Electrical Properties
Thermal Properties
Physical Properties
Additional Information
Frequently Asked Questions About ABChimie® 526 UV
What are typical applications for ABChimie® 526 UV?
ABChimie® 526 UV is a UV-curable conformal coating designed to protect printed circuit board assemblies (PCBs) and components in demanding manufacturing environments, including:
- Automotive electronics (e.g., control units, sensors)
- Industrial automation (e.g., motor drives, PLCs)
- Consumer electronics (e.g., smart devices, wearables)
- Other high-reliability electronic assemblies
Should I control the application environment?
ABChimie® 526 UV should be applied at a minimum temperature of 16°C and a minimum relative humidity of 50% are recommended for coating application. The relative humidity of at least 50% is recommended for the second ABchimie TDS ABchimie 526 UV and UV LED polymerization mechanism. Before applying, the printed circuit board must be clean, dry, and free of moisture. A stage in an oven at 80 °C for 4 hours is usually sufficient.
Learn More About ABChimie® 526 UV
ABChimie® 526 UV is a proven solution for engineers seeking fast, reliable protection of electronic assemblies in demanding manufacturing environments. This UV-curable conformal coating delivers rapid curing, excellent electrical insulation, and strong environmental resistance—ideal for applications in automotive electronics, industrial automation, consumer electronics, and other high-reliability assemblies.
Main Advantages of ABChimie 526 UV
ABchimie® 526 UV cures through a dual mechanism: UV exposure initiates rapid surface curing, while moisture ensures complete curing throughout the coating. This combination provides a uniform, durable protective layer with optimal adhesion and performance.
ABChimie® 526 UV provides excellent mechanical protection. This hardness helps resist scratches, abrasion, and minor impacts, ensuring long-term stability of encapsulated components.
ABchimie® 526 UV can be soldered through without generating highly toxic gases, ensuring safe processing. The coating maintains its integrity during soldering, allowing reliable connections while protecting the underlying components.
ABchimie® 526 UV provides excellent adhesion even in harsh environments. The coating forms a durable, long-lasting protective layer that resists moisture, chemicals, and temperature variations, ensuring reliable performance under demanding conditions.
How to Choose a Conformal Coating
Selecting the most suitable resin requires consideration of key factors:
- ✔ Norms & Compliance
- ✔ Environment / Exposure Conditions
- ✔ Repairability
- ✔ Electrical Performance
- ✔ Application Method
- ✔ Operating Temperature
Compliance You Can Trust ✅
ABChimie® 526 UV meets stringent industry standards, ensuring reliability and regulatory adherence for OEMs and contract manufacturers:
- REACH Compliant
- RoHS 2011/65/EU Compliant
UL94 V0
UL746E (QMJU2-E308681)
Curing Tip: ABChimie 526 UV cures with UV rays. It is crucial to use the appropriate equipment, as well as the recommended settings, to achieve the best properties of the resin.
Ref. Leistung / ref power ln % over wavelength in nm
Key Curing Properties (DS55MS / DS
Mercury (arc lamp)
200-400 nm IR up to 800 nm
3000 mJ/cm2
Coating Thickness
100 μm
Distance UV lamp - PCB
1 - 10 cm
Minimum UVA Power
150 mW/cm2
Typical property values shown for reference only and should not be used as specifications.
How to Optimise for the Best Results
PCBs must be completely dry and thoroughly clean, with no dust, grease, wax, or other contaminants. Coating adhesion depends directly on the quality of the substrate. All flux residues must be fully removed, as they can become corrosive and lead to circuit malfunctions.
For cleaning equipment or removing uncured ABchimie 526 UV or UV LED varnish, we recommend using SND or ABclean solvent.
It is essential to use the correct UV equipment (UV or LED) and follow the recommended settings to achieve the optimal properties of the cured conformal coating. These parameters influence both the coating’s reactivity and surface quality. ABchimie526UV and UV LED cure through UV exposure, with moisture contributing to a secondary curing mechanism.
Curing Mechanism: UV light creates the first cure, and after 7 days the moisture from the environment completes the curing process.
How does Moisture Cure Work?
During UV curing, exposure to UV light activates the photoinitiators in the conformal coating, triggering rapid polymerization of the resin. This results in an immediate surface cure and fast development of handling strength. UV curing provides precise, on-demand curing in exposed areas, enabling high-throughput processing while maintaining coating uniformity.
ABchimie526UV and ABchimie526UV LED use the same dual curing mechanism to ensure complete curing, including in shadowed or hard-to-reach areas. Initial curing is achieved by UV exposure, while a secondary moisture-activated cure completes the process at ambient temperature. For full curing in shaded areas, a minimum relative humidity of 50% is required for at least 7 days.
ABChimie 526 UV is also available in the LED lamp version, which cures with an LED lamp.
ABChimie 526 UV LED [Go to 526 UV LED Product Page↗]
- Conformal Coating
- Fluorescent under UV light
- Excellent adhesion to flexible substrates
- Dual curing with UV LED exposure and moisture curing
Best suited for: High-speed process looking to use LED light for curing
Recently viewed products
Humiseal UV92 | Urethane acrylate UV masking material
- Easily Applied by syringes, dispensing machines
- Keeps contact points and connections free of coating
- Easily removed by peeling - leaves no residue to interfere with subsequent operations
SIMSON ISR 70-03 | Silyl Modified Polymers (SMP)
- Elastic bonding adhesive
- Durable and reliable bonds
- Free from Isocyanates, Solvents and Silicone
3M™ Tape Primer 94
- Enhances adhesion of 3M tapes
- Ideal for low surface energy materials
- Improves bond strength, consistency, and long-term durability
LOCTITE ABLESTIK ICP 4015
- One component
- High flexibility
- Low temperature cure
OPTOLINQ TMC-3282 | Transparent Mold Compound
- Exceptional moldability with long spiral flow
- Excellent performance at high temperature and high humidity conditions
- Excellent adhesion and low stress
ABchimie 9111 UV Glue
- One-component
- Fast UV Curing
- Adhesion to many substrates
3M™ Adhesion Promoter 111
- Higher bond strength.
- Isopropyl alcohol based solvent system
- Non-offensive odor
3M™ Scotchcast™ 260 Epoxy Powder Resin
- Fast curing
- Excellent electrical properties
- Excellent flow • UL 1446 Electrical Insulation System (EIS) approval at class 120(E), 130(B), 155(F), and 180(H)
Humiseal 1B73 | Acrylic conformal coating
- Acrylic Conformal Coating
- Transparent (UV Fluorescent)
- Dielectric Strength - 6300 V
