ABchimie AVR80 BA GEL Removable Acrylic Coating
Harmonization Code : 3208.20.90 | Paints and varnishes that are dispersed or dissolved in a non aqueous medium
Main features
- Can be soldered through
- Wide temperature range -65°C to +150°C
- Excellent adhesion
Product Description
ABchimie AVR80 BA GEL is a non‑toxic, flexible, transparent acrylic gel coating developed to provide high‑performance protection for electronic circuitry. Engineered for applications requiring enhanced environmental resistance and thicker protective layers, the gel formulation allows for damming and the creation of high‑thickness deposits with excellent clarity and adhesion.
This coating is fully repairable and can be completely removed using ABchimie SND or DNS (both 100% ozone‑friendly), making it ideal for assemblies that may require rework while still maintaining top‑tier protective performance.
Product Key Features
- Allows creation of dams and high‑thickness protective layers
- Excellent adhesion under a wide range of climatic conditions
- Broad operating temperature range: –65°C to +150°C
- Can be soldered through safely without producing toxic gases
- Resistant to mold growth and environmental contaminants
- Fully removable with ABchimie SND or ABclean
Applications
- High‑thickness conformal coating applications
- Protective damming for selective coating areas
ABC-AVR80BAGEL
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 weeksPackaging
TDS, SDS & Technical Documents
- AVR80 BA GEL TDS
- AVR80 BA GEL SDS
Technical Specifications
General Properties
Electrical Properties
Thermal Properties
Additional Information
Product Selector Guide Between AVR80 BA GEL and AVR80 GEL
| Property | AVR80 BA GEL | AVR80 GEL |
| Type | Flexible, transparent acrylic gel coating | Gel‑form acrylic for high‑thickness deposits |
| Transparency |
Transparent gel
|
Ultra‑clear gel for optical/sensor application
|
| Form / Viscosity | Gel consistency | Gel consistency |
| Operating Temperature | −65 °C to +150 °C | −65 °C to +150 °C |
| Removability | Fully removable with ABchimie SND or ABclean | Removable with ABchimie SND or DNS |
| Solder‑Through Capability | Yes, no toxic gases produced | Yes, no isocyanates present |
| Drying / Curing | Air‑dries at room temperature | Touch‑dry <30 min; full cure 24h |
| Advantages | Applications requiring non‑toxic, thick protective gel layers (dams, barriers) | Applications requiring optical clarity, sensor encapsulation, or transparent high‑thickness protection |
Instructions for Use
Workshop temperatures of less than 16°C or relative humidities in excess of 75% are unsuitable for the application of AVR80 BA GEL.
Before coating Pcbs must be clean, dry and without moisture. The CI being humidity sensor, it is important to remove it before coating. A passage in oven from 1 to 2 hours at 60°C is generally enough.
AVR80 BA GEL contains a UV trace which allows inspection of the PCB after coating to ensure complete and even coverage. The stonger the reflected light, the thicker the coating layer is.
Recently viewed products
JNC PI-6643-004 | Insulating Polyimide Ink
- Thermal Curable
- High Heat Resistance
- Inkjet Printing
BGT-PO180 | Polyolefin Back Grinding Tape
- 180 µm film thickness
- Urethane UV removable adhesive
- High accuracy and easy to peel
FM-7711 | Reactive PDMS - Bi terminal Methacryloxy
- Bi terminal
- 1,000 g/mol | 18 mPas
- Methacryloxy functional groups
JNC PA-1210-035 | Insulating Polyacrylate Ink
- UV Curable/ Solvent free
- High Insulation reliability for thin film devices
- Optical Devices
PIT1SD-2RL | 1mil Polyimide (Kapton) Tape with Silicone Adhesive | Double sided & Double Liner
- 1 mil polyimide film
- Silicone adhesive
- >6500V breakdown voltage
PIT1N-B | 1-mil Black Polyimide (Kapton) Film
- 1 mil thick black polyimide film
- No adhesive
- >2,800 breakdown voltage
Glass Repellency Treatment
- For making glass surfaces hydrophobic and oleophobic
- 2-20 nm thickness
- Easy to apply, optically clear and ultra thin
3M™ Scotch-Weld™ EPX Mixing Nozzle
- Simultaneous metering, mixing, and application in one step
- Used nozzle doubles as a cartridge storage seal between uses
- Compatible with 3M EPX manual and pneumatic applicators
VCF-4S200K | LINQSTAT 4 mil - 200,000 Ω/sq Antistatic film
- 4 mil - 100um - 0.1mm
- 200,000 ohms/sq Surface resistivity
- Not volume conductive
