ABchimie DVA XY Acrylic Thinner
Harmonization Code : 3814001000 |
Main features
- Designed for acrylic conformal coatings
- Optimized for AVR80 XY
- Ensures proper viscosity for dip, spray, and automated coating processes
Product Description
ABchimie DVA XY is a specialized solvent blend developed for use with acrylic‑based conformal coatings, with optimal compatibility for AVR80 XY. It is designed to adjust the viscosity of acrylic coatings for efficient and controlled application.
Primarily used as a thinner, DVA XY ensures smooth, even coating deposition when applied through dip coating, spray application, or selective coating equipment. Its formulation maintains coating performance while enabling the correct film build and flow characteristics required for consistent results.
Product Key Features
- Designed for all acrylic conformal coatings
- Optimized for AVR80 XY compatibility
- Ensures proper viscosity for dip, spray, and automated coating processes
Applications
- Acrylic conformal coating processes requiring controlled flow characteristics
ABC-DVAXY
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 weeksPackaging
TDS, SDS & Technical Documents
- DVA XY FT TDS
- DVA XY FT SDS
Technical Specifications
No specifications available.
Additional Information
Instructions for Use
Spray Coating
When solvent based coatings are sprayed, the higher pressure at the nozzle forces the solvent within the coating to evaporate very quickly. Therefore, to avoid cob-webbing ( i.e. the coating drying immediately as it leaves the spray gun), extra solvent must be added. DVA XY should be used at levels of between 1:1 and 1:3 (Coating:Thinners) depending upon the application.
To avoid microbubbles in the coating, stand 2 minutes before attempting to spray. Thinners should be added gradually until a spray pattern is achieved without "cob-webbing" and the coating weight required is reached.
Dip Coating
DVA XY may be used to maintain the viscosity of acrylic conformal coatings in open tanks used in dip coating processes. Over time the solvent within the coatings evaporates, increasing the viscosity of the coating, and giving a thicker coating. This solvent loss must be replaced to maintain the correct viscosity to give an economical coating thickness.
In most systems it is sufficient to measure the viscosity of the coating once per week. DVA XY is a flammable solvent blend and should be used in a well ventilated area and all sources of ignition must be avoided.
Please refer to the separate Health & Safety Data Sheet for further details.
Recently viewed products
TMC-8040 | Optically clear Molding Compound
- High reliability
- 7 segment monochrome LED
- Medium blue ray decay
LOCTITE ECCOBOND LUX A4035T
- Photocurable
- Pale yellow
- Photodiode and Optical fiber terminations
BMI-6000 Imide-extended Bismaleimide Oligomer
- Superior thermal stability
- Good dielectric properties
- Toughener
LOCTITE SF 7360
- Low odor
- Stencil and Nozzle cleaner
- Compatible with epoxy adhesives
KESTER 958 Soldering Flux
- Excellent for bare copper applications
- Conformal coating compatible
- Improves soldering performace
ITO-175 | 175 μm Indium Tin Oxide film
- 85% Light transmittance
- 175um thickness
- Ease of processing
LINQCELL SFP 600 | Stainless Steel Sintered Fiber Felt
- 0.6mm - 600um - 23.6 mil
- Superior filtration
- Purification and dust collection
LOCTITE SF 7387
- Activator
- Very low viscosity
- Promote cure of acrylic adhesives
FM-DA26 | Reactive PDMS - Monoterminal Hydroxy (Diol)
- Mono terminal
- 15,000 g/mol | 500 mPas
- Hydroxy (Diol) functional group
