LOCTITE ECI 8001 E&C
Harmonization Code : 32159090 | Printing ink, writing or drawing ink, and other inks, whether or not concentrated or solid, specifically for those classified as other within that category
Main features
- Rapid heating with fast, defined cut-off temperatures, no external control devices needed
- Printable on most common substrates
- Screen printable
Product Description
LOCTITE ECI 8001 E&C is a Positive Temperature Coefficient (PTC) screen printable conductive ink designed for applications where self-regulating heaters are required.
LOCTITE® ECI 8001 E&C is a screen printable ink formulated to rapidly heat to a specific threshold temperature and then maintain a constant temperature for the device. The self-regulating temperature of the bare ink is around 55 to 60ºC. It can be cured using hot air drying or infrared. It is ideal for use on PET substrates.
ECI8001
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 20 daysPackaging
TDS, SDS & Technical Documents
- TDS LOCTITE-ECI-8001-EC-EN
- 1767081_MSDS_UT_GB_EN
Technical Specifications
General Properties
Physical Properties
Additional Information
LOCTITE ECI 8001 E&C can be dried using forced air or infrared systems. Higher temperatures for longer time exposure will improve the performance. Care should be taken with infrared. Too much energy can destroy the coating. Design drying rates for the maximum the substrate and production speeds can tolerate.
Recently viewed products
Humiseal UV92 | Urethane acrylate UV masking material
- Easily Applied by syringes, dispensing machines
- Keeps contact points and connections free of coating
- Easily removed by peeling - leaves no residue to interfere with subsequent operations
SIMSON ISR 70-03 | Silyl Modified Polymers (SMP)
- Elastic bonding adhesive
- Durable and reliable bonds
- Free from Isocyanates, Solvents and Silicone
3M™ Tape Primer 94
- Enhances adhesion of 3M tapes
- Ideal for low surface energy materials
- Improves bond strength, consistency, and long-term durability
LOCTITE ABLESTIK ICP 4015
- One component
- High flexibility
- Low temperature cure
OPTOLINQ TMC-3282 | Transparent Mold Compound
- Exceptional moldability with long spiral flow
- Excellent performance at high temperature and high humidity conditions
- Excellent adhesion and low stress
ABchimie 9111 UV Glue
- One-component
- Fast UV Curing
- Adhesion to many substrates
3M™ Adhesion Promoter 111
- Higher bond strength.
- Isopropyl alcohol based solvent system
- Non-offensive odor
3M™ Scotchcast™ 260 Epoxy Powder Resin
- Fast curing
- Excellent electrical properties
- Excellent flow • UL 1446 Electrical Insulation System (EIS) approval at class 120(E), 130(B), 155(F), and 180(H)
Humiseal 1B73 | Acrylic conformal coating
- Acrylic Conformal Coating
- Transparent (UV Fluorescent)
- Dielectric Strength - 6300 V
