LINQBOND GT2301 | Glob Top
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- solvent-free
- excellent vibration resistance
- one-component
Product Description
GT2301
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 16 weeks
Shipping in 16 weeks
Shipping in 16 weeksPackaging
TDS, SDS & Technical Documents
- TDS_LINQBOND GT-2301
Technical Specifications
General Properties
Thermal Properties
Electrical Properties
Chemical Properties
Physical Properties
Additional Information
Instructions for Use:
-
Before use, thaw the product to reach room temperature for 1–2 hours. Syringe should be placed vertically while thawing. Keep container airtight until room temperature is reached.
-
Ensure the surface to be bonded is clean and free of contaminants like dirt, grease, or mold release agents. A simple solvent wipe is often sufficient.
-
Cure time may vary based on the actual part geometry, material volume, and equipment. It is recommended to test on actual parts and equipment.
-
For large-scale applications, consider a staged curing process: start with a lower temperature precure, followed by a full cure at a higher temperature to effectively manage heat release.
-
The epoxy cannot be refrozen once exposed to room temperature.
Storage and Handling
Store and transport at a -5°C temperature. Keep away from moisture and heat sources. It is strictly forbidden to store in outdoor environments. Lower temperatures will ensure better flow and nullify any chance of cross-linking.
-
Shelf life at -5°C is 365 days.
Recently viewed products
PEAM-1044 Low warpage Polyester Acrylate/Methacrylate
- Thermally stable
- Low warpage
- High adhesion to various substrates
LOCTITE ECCOBOND 50300-1
- One component
- Low CTE
- Low viscosity
LINQBOND PM-4911HV | Two part silicone potting material
- Low stress silicone potting gel
- Low viscosity, good leveling, and bubble-free curing
- Excellent long term temperature resistance
OLS-1000LV | Liquid encapsulant - Two part Epoxy
- Extremely Low viscosity
- Rapid Cure
- Visible Light Blocking
Hysol MG27F-0521LF | Gold Epoxy Mold Compound
- UL listed file number E255557
- Long Flow version of MG27F-0521
- Used for ceramic capacitors
