HumiSeal Thinner 673
Harmonization Code : 3814001000 |
Main features
- RoHS Directive 2015/863/EU compliant
- For use with acrylic conformal coatings
- Ensures proper viscosity adjustment
Product Description
HumiSeal Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2015/863/EU.
Product Key Features
- Ensures proper viscosity adjustment for HumiSeal conformal coatings
- Fully compliant with RoHS Directive 2015/863/EU.
Applications
- Adjusting viscosity of HumiSeal acrylic conformal coatings.
HS-T673
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 6 weeksPackaging
TDS, SDS & Technical Documents
- Thinner 673 TDS
Technical Specifications
General Properties
Thermal Properties
Additional Information
Directions for Use
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
Handling Precautions
HumiSeal® Thinners are flammable and the following standard safety precautions should be observed:
- Use only in well ventilated areas.
- Protective gloves and goggles should be worn.
- In case of prolonged skin contact, wash with water.
- In case of eye contact, flush with water and contact physician.
- Avoid prolonged breathing of vapors.
- Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters.
- Consult the Safety Data Sheet (SDS) for more specific product information.
Recently viewed products
LINQBOND SO-196CM | One-component Moisture Curing Silicone Adhesive
- One-component
- Fast cure at low temperature
- High stability
ED-645CM | Two-Part Epoxy Adhesive for General Applications
- Excellent electrical insulation
- Reliable in humid conditions
- High Viscosity
KESTER 5744 Solder Saver
- Effectively removes dross
- Low-fuming and remains stable at soldering temperatures.
- Can be easily skimmed off the pot after use.
3M™ Scotch-Weld™ Epoxy Adhesive DP490
- 90-minute work life supports complex assembly positioning and alignment
- Maintains bond strength across high- and low-temperature operating conditions
- Bonds metals, composites, glass, ceramics, plastics, and wood
3M™ Scotch-Weld™ DP460
- High shear strength
- 60-minute work life
- Easy mixing
3M™ Scotch-Weld™ Epoxy Adhesive DP760
- 2:1 mix ratio
- Non sagging paste
- High temperature resistance
