LOCTITE STYCAST OB4000
Harmonization Code : 3907.30.00.85 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
- LED Encapsulation
- Moisture resistant
- Excellent thermal shock properties
Product Description
LOCTITE® STYCAST OB 4000 is Part B of LOCTITE® STYCAST OS4000, a fast curing, water-white epoxy casting compound designed for the encapsulation of LED lamps and displays. The mixed compound will gel rapidly at temperatures above 120°C; following a short post cure of 2 hours @ 125°C it will develop high strength, moisture resistant castings with excellent thermal shock properties.
LOCTITE® STYCAST OS4000 can be colored and diffused by the addition of specific dye concentrates, AC7113 red, AC7044 green and AC7088 diffusant concentrate
Mix Ratio, parts by weight* 100/100
OB4000
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 70 daysPackaging
TDS, SDS & Technical Documents
- LOCTITE OS4000 TDS Feb 2003
- LOCTITE STYCAST OB 4000 known as HYSOL OB4000 GA EN
- LOCTITE STYCAST OB 4000 known as HYSOL OB4000 GA NL
Technical Specifications
General Properties
Thermal Properties
Physical Properties
Recently viewed products
Hysol GR300S | Black Epoxy Mold Compound
- Low CTE (15 ppm/°C)
- Low stress
- High productivity
Hysol MG40FS | Black Epoxy Mold Compound
- Designed for PDIP packages
- Excellent HTRB performance
- Ideal for high voltage discrete semiconductors
Hysol GR2821 | Black Epoxy Mold Compound
- Completely Superseded by GR2820
- Ultra-low stress epoxy mold compound
- Thin Wall Crack Resistance
LOCTITE SI 5088
- Straw colored liquid
- UV Cure
- Alkoxy Silicone
LINQCELL GDP340 | 340um Non woven Carbon Paper
- 0.34mm - 340um - 13.4mil
- Non woven
- Highly flexible - Roll form
ODF-10 | Diffusion Agent for LEDs
- Diffusion agent
- Low effect on brightness
- Soft and consistent luminosity
PTM 7900 | Phase Change Pad
- 0.045 Thermal Impedance
- 8.0 Thermal Conductivity
- Pad form
HT 11000 | One part Hybrid Thermal Gel
- Dark Gray
- 11 Thermal Conductivity
- Highest thermal conductivity
