PIT1S-ESD-DCD | 1 mil Die Cut ESD Polyimide (Kapton) Tape with Silicone Adhesive | Single side Discs
Harmonization Code : 3919.90.80.99 | Polyacrylic plates / sheets / film / tape / strip, self-adhesive, in rolls
Main features
- 1 mil polyimide film
- Single side Silicone adhesive
- >6500V breakdown voltage
Product Description
CAPLINQ LINQTAPE™ PIT1S-ESD Series polyimide tape is a high-temperature resistant, antistatic treated polyimide film mounted with a silicone adhesive. It is designed for both masking and temporary bonding in many high-temperature applications in semiconductor, electronic, automotive, and other general manufacturing industries.
LINQTAPE™ PIT1S-ESD Series polyimide tape provides an excellent balance of electrical, mechanical, thermal, and chemical properties over a wide range of temperatures. It has enhanced strength for puncture and tear resistance and can be used in applications that may see intermittent temperatures up to 260°C (500°F).
LINQTAPE™ PIT1S-ESD-DCD tapes come in varying designs and patterns. This tape can be delivered in a range of die-cut disc sizes with diameters ranging from 1/8" to 12". Custom thicknesses, designs, and diameters are available upon request.
Key Features
- Low peel voltage
- Anti-static conductive polymer
- Excellent dielectric properties
PIT1S-ESD-DCD Series
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 2 weeks
Shipping in 2 weeks
Shipping in 2 weeksPackaging
TDS, SDS & Technical Documents
- Linqtape PIT1S-ESD-DCD TDS
Technical Specifications
General Properties
Thermal Properties
Electrical Properties
Other Properties
Mechanical Properties
Additional Information
Product Applications
In sheet form (LINQTAPE PIT1S-ESD Series), the antistatic tapes are used to safely dissipate electrostatic charges before they can build up and cause harmful ESD events to critical electronic components.
These antistatic tapes also have a high dielectric strength which allows them to be used as electrical insulators and isolators. Further to this, these antistatic polyimide tapes have a low peel voltage feature which is important as they generate little voltage when they are unrolled – thereby protecting static-sensitive devices by minimizing the electrostatic charges added when the tape is applied.
This combination of properties makes them suitable for a range of applications including but not limited to batteries, smartphones, tablets, and any other application that requires an anti-static polyimide tape.
In disc form (LINQTAPE PIT1S-ESD-DCD Series), the precut shapes can be peeled right on the release liner and applied. CAPLINQ can also make custom-made stamped polyimide shapes that are stamped according to your specifications. Ask your representative for more information.
The silicone adhesive used makes it better suited to even higher temperature applications, but in the case that a silicone adhesive cannot be used, CAPLINQ offers also a version with an acrylic adhesive, PIT1A-ESD Series.
Application Ideas
- Protection of static-sensitive devices
- Temporary bonding of thermocouples for oven profiling
- Bonding of devices before solder reflow
- Splicing of Insulation Layers
- Gold Finger Masking
- Insulating circuit boards and coils
Recently viewed products
DetecTape™ H2 | 20 mil NP| Hydrogen Leak Detection
- Self fusing 20 mil tape
- Easy to install
- No perforation
Glass Repellency Treatment
- For making glass surfaces hydrophobic and oleophobic
- 2-20 nm thickness
- Easy to apply, optically clear and ultra thin
3M™ Scotch-Weld™ EPX Mixing Nozzle
- Simultaneous metering, mixing, and application in one step
- Used nozzle doubles as a cartridge storage seal between uses
- Compatible with 3M EPX manual and pneumatic applicators
VCF-4S200K | LINQSTAT 4 mil - 200,000 Ω/sq Antistatic film
- 4 mil - 100um - 0.1mm
- 200,000 ohms/sq Surface resistivity
- Not volume conductive
