PIT1S-UT-RL | 1mil Polyimide (Kapton) Tape | Ultra Thin Silicone Adhesive with Release Liner
Harmonization Code : 3919.90.80.99 | Polyacrylic plates / sheets / film / tape / strip, self-adhesive, in rolls
Main features
- 1 mil polyimide film
- Ultra thin Silicone adhesive
- >6000V breakdown voltage
Product Description
LINQTAPE™ PIT1S-UT-RL is a balanced, very thin and adjustable tape. It combines our 1-mil (25.4 micron) thick polyimide film – the generic equivalent of DuPont® Kapton™ HN tape – with an ultra thin 0.5mil (12.7 micron) silicone pressure adhesive and a release liner. This combination makes the PIT1S-UT-RL a very thin film with great breakdown voltage and a total thickness of only 1.5 mil (38.1µm). A product with excellent adhesion and electrical strength at high temperatures.
LINQTAPE™ PIT1S-UT-RL tapes are high performance, temperature resistant polyimide tapes that use a polyimide film as a backing film. This backing film is the generic version of DuPont's Kapton HN film and is thin at 1mil (25.4µm) yet is just as flame retardant as its thicker counterparts. Laminated to this is a 0.5mil (12.7µm) thick pressure sensitive silicone adhesive making the total thickness of the polyimide film plus adhesive only 1.5mil (38.1µm) thick. PIT1S-UT-RL remains both electrically and mechanically stable across temperatures ranging from -269°C to 400°C (-452°F to 752°F).
Polyimide tape is widely used in applications requiring high electrical insulation and an excellent balance of thermal, mechanical, chemical and electrical properties. As a base material, polyimide is extremely versatile as it can be die-cut, punched and thermoformed with or without adhesive.
It is extremely well suited, and extensively used for wrapping cable and magnet wire. A further list of applications includes, but is not limited to aircraft and spacecraft wiring, insulation tubing, slot insulation, fiber optics cable, heater circuits, automotive diaphragms and manifolds, high temperature splicing and other applications that can make use of the ultra-thin, high temperature, electrically insulating properties of the PIT1S-UT-RL polyimide HN tapes.
Applications
- Cable Wrapping
- Magnet Wire Wrapping
- Automotive Manifolds
- Automotive Diaphragms
- Flexible Printed Circuits
- Heater Circuits
- Aircraft / Spacecraft Wiring
- Insulation Tubing
- Slot Insulation
- Fiber Optics Cable
- High Temperature Splicing
- 3D printing ABS plastic
Product Features and Benefits
- Good Chemical Resistance
- Mechanically and electrically stable from -269°C to 400°C (-452°F to 752°F)
- Can be laminated, die-cut, metallized, punched, adhesive coated and thermoformed
- Insensitive to radiation damage
- Adheres well to ABS
- Improved Moiture Barrier
Product Nomenclature
- PIT: HN Polyimide Tape
- 1: 1 mil (25.4µm) thick tape
- S: Silicone adhesive
- UT: 0.5 mil Thin Adhesive Layer
- RL: Release liner
PIT1S-UT-RL
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 2 weeks
Shipping in 2 weeks
Shipping in 2 weeksPackaging
TDS, SDS & Technical Documents
- LINQTAPE PIT1S-UT-RL TDS
Technical Specifications
General Properties
Thermal Properties
Electrical Properties
Other Properties
Mechanical Properties
Recently viewed products
Humiseal Thinner 521EU
- RoHS Directive 2002/95/EC compliant
- For use with HumiSeal conformal coatings
- Ensures proper viscosity adjustment
WMC-G279 | White Epoxy Molding Compound
- White transmitting EMC for optocouplers
- Balanced moldability and cycle efficiency
- Low stress
HGPA12 | High Thermal Conductivity Gap Pad
- 0.14 Thermal Impedance
- 12 Thermal Conductivity
- Low oil bleeding & Low volatile
PIT0.5S-UT-DCD | 0.5 mil Die Cut Polyimide (Kapton) Tape with silicone adhesive| Single Sided Discs
- 0.5 mil polyimide film
- Ultra Thin Silicone Adhesive
- Die cut discs
BMI-3000 CG Low Cost Bismaleimide (Imide Extended) in Powder Form
- Superior thermal stability
- High adhesion to various substrates
- Hydrophobic toughener
