PIT5S-DCD | 5 mil Die Cut Polyimide (Kapton) Tape with Silicone Adhesive | Single Sided Discs
Harmonization Code : 3919.90.80.99 | Polyacrylic plates / sheets / film / tape / strip, self-adhesive, in rolls
Main features
- Good chemical resistance
- Good solvent resistance
- High electrical resistance
Product Description
LINQTAPE PIT5S-DCD is a 5-mil, silicone-adhesive, Kapton HN Tape Alternative whose high performance, flexible, high-temperature resistant polyimide filmis used for many high temperature applications. Polyimide is preferred over polyester for many high temperature applications. These applications include but are not limited to semiconductor, smartcard, electronic, automotive and general manufacturing industries.
. LINQTAPE PIT5S-DCD Series Tape provides an excellent balance of electrical, mechanical, thermal, and chemical properties over a wide range of temperatures. It can be used in applications that may see temperatures up to 260°C (500°F). It can be used in applications that may see temperatures up to 260C. PIT5S-DCD polyimide tape can be delivered in a range of die cut discs sizes with diameters ranging from 1/8" to 12".
PIT5S-DCD Series
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 2 weeks
Shipping in 2 weeks
Shipping in 2 weeksPackaging
TDS, SDS & Technical Documents
- LINQTAPE PIT5S-DCD TDS
Technical Specifications
General Properties
Thermal Properties
Electrical Properties
Other Properties
Mechanical Properties
Recently viewed products
SAC305 on 13" Tape & Reel
- Lowest cost Sn/Ag/Cu alloy on tape & reel
- Suitable for BGA and flip chip packaging techniques
- Compatible with almost all existing pick and place feeders
MVCF-8S50K | LINQSTAT 8mil - 50,000 Ω/sq Conductive Film
- 8 mil - 203um - 0.2mm
- ±50,000 ohms/sq Surface resistivity
- ±TBD ohms/cm Volume resistivity
Kester TSF-6502JCR
- 8-hour stencil life
- Printing up to <16mil pitch
- ROL1 & Bellcore GR-78 compliant
KESTER 2331-ZX Soldering Flux
- Neutral pH
- Minimal foaming
- Low-odor emission
OPTOLINQ GT-W170MG | White Epoxy Mold Compound
- High light reflectance and excellent light shielding
- Low yellowing at high temperature
- High MSL performance
BMI-3000 Gel Bismaleimide (Imide Extended)
- Superior thermal stabilty
- Hydrophobic
- Toughener
JNC PI-6322-001 | Insulating Polyimide Ink
- Thermal Curable
- Heat Resistance
- Low Temperature Curing
PIT1N-DCS | 1-mil Die Cut Polyimide (Kapton) Film | Squares
PI-6324-001 | Insulating Polyimide Ink
- Thermal Curable
- Heat Resistance
- Low Temperature Curing
