HumiSeal Thinner 73
Harmonization Code : 3814001000 |
Main features
- RoHS Directive 2015/863/EU compliant
- Ensures proper viscosity adjustment
- For use with 1B73 and 1A20
Product Description
HumiSeal Thinners are blends of solvents, formulated to maintain the original system balance when added to the correct coating type. These HumiSeal® Thinners are in full compliance with the RoHS Directive 2015/863/EU.
Product Key Features
- Ensures proper viscosity adjustment for HumiSeal conformal coatings
- Fully compliant with RoHS Directive 2015/863/EU.
Applications
HS-T73
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 6 weeksPackaging
TDS, SDS & Technical Documents
- Standard_Thinners_HumiSeal_Technical_Data_Sheet
- Thinner 73
Technical Specifications
General Properties
Thermal Properties
Additional Information
Directions for Use
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
Handling Precautions
HumiSeal® Thinners are flammable and the following standard safety precautions should be observed:
- Use only in well ventilated areas.
- Protective gloves and goggles should be worn.
- In case of prolonged skin contact, wash with water.
- In case of eye contact, flush with water and contact physician.
- Avoid prolonged breathing of vapors.
- Unused portions of HumiSeal® products must be disposed of in strict compliance with Local, State, and Federal laws governing such matters.
- Consult the Safety Data Sheet (SDS) for more specific product information.
Recently viewed products
LOCTITE SI 5421
- Room temperature cure
- Low stress
- EMI Shielding gasketing material
OP-225 | Nano-Scale Adhesion-Promoting Surface Treatment
- Improved adhesion strength of paints/coatings on metal surfaces
- No outgassing
- No stress build-up on the substrates
SIMSON ISR 70-03 | Silyl Modified Polymers (SMP)
- Elastic bonding adhesive
- Durable and reliable bonds
- Free from Isocyanates, Solvents and Silicone
3M™ Tape Primer 94
- Enhances adhesion of 3M tapes
- Ideal for low surface energy materials
- Improves bond strength, consistency, and long-term durability
LOCTITE ABLESTIK ICP 4015
- One component
- High flexibility
- Low temperature cure
OPTOLINQ TMC-3282 | Transparent Mold Compound
- Exceptional moldability with long spiral flow
- Excellent performance at high temperature and high humidity conditions
- Excellent adhesion and low stress
ABchimie 9111 UV Glue
- One-component
- Fast UV Curing
- Adhesion to many substrates
3M™ Adhesion Promoter 111
- Higher bond strength.
- Isopropyl alcohol based solvent system
- Non-offensive odor
3M™ Scotchcast™ 260 Epoxy Powder Resin
- Fast curing
- Excellent electrical properties
- Excellent flow • UL 1446 Electrical Insulation System (EIS) approval at class 120(E), 130(B), 155(F), and 180(H)
