PTFE2S | 2-mil Skived PTFE Tape with Silicone Adhesive
Harmonization Code : 3904.61.00.00 | Polytetrafluoroethylene plates / sheets / film / tape / strip, self-adhesive, in rolls
Main features
- 2 mil Skived PTFE film
- Silicone adhesive
- >7500V breakdown voltage
Product Description
LINQTAPE PTFE2S-Series describes our 2-mil thick Skived PTFE Film with a silicone pressure-sensitive adhesive. PTFE2S-Series tapes are used for high-temperature applications. They have excellent acid resistance as well as alkali resistance and have very low surface friction, making them ideal for heating panels. These tapes provide an excellent balance of electrical, thermal, and chemical properties over a wide range of temperatures, and can be used in applications that may see temperatures up to 260°C (500°F)
Further, PTFE2-Series have been used successfully to wrap high voltage wire in high-temperature operating conditions. Because of its Class H rating, it can be used in many electrical insulation applications. PTFE2S comes in 33-meter (36 yard) rolls of varying widths. LINQTAPE PTFE films with silicone adhesive are available in a range of thicknesses, starting from 2 mil (50.8µm) thickness and up. Custom thicknesses are available upon request.
Key Features:
- Insulating tape
- Pressure-sensitive silicone adhesive
- High-temperature applications
- Excellent acid and alkali resistance
- Low surface friction
- Class H rating
PTFE2S-Series
Shipping in 2 weeks
Shipping in 2 weeks
Shipping in 2 weeksPackaging
TDS, SDS & Technical Documents
- PTFE2S-Series
Technical Specifications
General Properties
Thermal Properties
Electrical Properties
Other Properties
Mechanical Properties
Additional Information
Application Ideas
- Heating panels
- Electrical insulation
- Thermal insulation
- Wrapping and connecting high-voltage cables
- Bellows and hose liners
- Tank and vessel lining
- Slide bearings
Recently viewed products
DOWSIL™ TC-5550 Thermal Conductive Compound
- Good pump-out resistance for bare die application
- High thixotropy
- Low thermal resistance
PIT1S-UT-RL | 1mil Polyimide (Kapton) Tape | Ultra Thin Silicone Adhesive with Release Liner
- 1 mil polyimide film
- Ultra thin Silicone adhesive
- >6000V breakdown voltage
Humiseal Thinner 521EU
- RoHS Directive 2002/95/EC compliant
- For use with HumiSeal conformal coatings
- Ensures proper viscosity adjustment
WMC-G279 | White Epoxy Molding Compound
- White transmitting EMC for optocouplers
- Balanced moldability and cycle efficiency
- Low stress
HGPA12 | High Thermal Conductivity Gap Pad
- 0.14 Thermal Impedance
- 12 Thermal Conductivity
- Low oil bleeding & Low volatile
PIT0.5S-UT-DCD | 0.5 mil Die Cut Polyimide (Kapton) Tape with silicone adhesive| Single Sided Discs
- 0.5 mil polyimide film
- Ultra Thin Silicone Adhesive
- Die cut discs
BMI-3000 CG Low Cost Bismaleimide (Imide Extended) in Powder Form
- Superior thermal stability
- High adhesion to various substrates
- Hydrophobic toughener
