3M™ Scotch-Weld™ Epoxy Adhesive 7260FC NS
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- Toughened formulation
- Cures at room temperature or accelerated at up to 65 °C
- Working time of 90 minutes
Product Description
3M™ Scotch-Weld™ 7260 B/A FC-NS is a thixotropic, two-part structural epoxy adhesive developed for high-strength, toughened bonding of metals and composite materials. It is well suited for demanding industrial environments where resistance to elevated temperatures and dynamic stresses is required.
Product Key Features
- Toughened formulation with high peel and shear strength
- Excellent resistance to oils, water, cleaners, diesel, and similar substances
- 90-minute working time
- Service temperature: -55 °C to 120 °C (tested up to 200 °C)
- Thixotropic consistency enables accurate application on vertical surfaces without sagging
- Cures at ambient temperature or can be accelerated at temperatures up to 65 °C
Applications
- Structural bonding of steel, aluminium, and composite materials
- Suitable for applications exposed to thermal cycling, vibration, or impact
3M-7260FCNS
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 2 weeksPackaging
TDS, SDS & Technical Documents
- 3M-7260FCNS
- 7260FCNS
Technical Specifications
General Properties
Physical Properties
Recently viewed products
PTFE2S | 2-mil Skived PTFE Tape with Silicone Adhesive
- 2 mil Skived PTFE film
- Silicone adhesive
- >7500V breakdown voltage
DOWSIL™ TC-5550 Thermal Conductive Compound
- Good pump-out resistance for bare die application
- High thixotropy
- Low thermal resistance
PIT1S-UT-RL | 1mil Polyimide (Kapton) Tape | Ultra Thin Silicone Adhesive with Release Liner
- 1 mil polyimide film
- Ultra thin Silicone adhesive
- >6000V breakdown voltage
Humiseal Thinner 521EU
- RoHS Directive 2002/95/EC compliant
- For use with HumiSeal conformal coatings
- Ensures proper viscosity adjustment
WMC-G279 | White Epoxy Molding Compound
- White transmitting EMC for optocouplers
- Balanced moldability and cycle efficiency
- Low stress
HGPA12 | High Thermal Conductivity Gap Pad
- 0.14 Thermal Impedance
- 12 Thermal Conductivity
- Low oil bleeding & Low volatile
PIT0.5S-UT-DCD | 0.5 mil Die Cut Polyimide (Kapton) Tape with silicone adhesive| Single Sided Discs
- 0.5 mil polyimide film
- Ultra Thin Silicone Adhesive
- Die cut discs
BMI-3000 CG Low Cost Bismaleimide (Imide Extended) in Powder Form
- Superior thermal stability
- High adhesion to various substrates
- Hydrophobic toughener
