LOCTITE EDAG PF 455BC E&C
Harmonization Code : 32159090 | Printing ink, writing or drawing ink, and other inks, whether or not concentrated or solid, specifically for those classified as other within that category
Main features
- Good dielectric strength
- Excellent printability
- Fast UV Cure
Product Description
LOCTITE EDAG PF 455BC E&C is a translucent UV curable acrylate that is formulated as a crossover dielectric and is compatible with other EDAG E&C inks. Mainly used as a dielectric ink.
LOCTITE EDAG PF 455BC is resistant to humidity, has excellent printability and adheres well to both treated and untreated polyester film substrates. It has good dielectric strength and is compatible for use with ElectroDAG conductive and dielectric polymer thick film inks.
UV Cure
- UV lamp 80Watt/cm or
- UV lamp 120Watt/cm
PF455BC
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 45 daysPackaging
TDS, SDS & Technical Documents
- LOCTITE EDAG PF 455BC
- LOCTITE EDAG PF 455BC SDS
Technical Specifications
General Properties
Physical Properties
Additional Information
Recommended UV Cure Condition
UV lamp 80Watt/cm or
UV lamp 120Watt/cm
When applying LOCTITE EDAG PF 455BC E&C as a crossover, two layers of approximately 12 to 15μm each should be applied. Cure both layers at an energy level of 0.5Joule/cm2 to obtain a good inter- coat adhesion between the first and second layer and to obtain a maximum adhesion of the crossover.
When using LOCTITE EDAG PF 455BC E&C as a crossover, be sure to dry the inks printed over it within 5 minutes. Do not let the inks printed over LOCTITE EDAG PF 455BC E&C air dry for extended periods of time.
Recently viewed products
LOCTITE SI 5404
- Electrical isolation
- Thermally conductive
- Bond metallic heat sinks
ABchimie ISO Cleaner
- Fast-drying, non-toxic solvent formulation
- Excellent compatibility with plastics and elastomers
- Efficiently removes greases, oils, and flux residues from PCBs
LOCTITE EDAG 965SS E&C
- Conductive
- Screen printable
- Excellent adhesion to polyester
LOCTITE ABLESTIK ECF 564A
- Electrically conductive
- Excellent thermal conductivity
- Passes Mil 5011 and NASA outgassing
PUREGuard 5170P | 5N Purity Irregular Alumina
- 5N purity (99.999%)
- 1.4 - 2.0um particle size
- Ideal for Semiconductor manufacturing
ABchimie DVA BA Non-Toxic Acrylic Thinner
- Non‑toxic solvent blend
- For AVR80 BA acrylic coating
- Easy to mix
LINQCELL GFP3000 | Graphite Felt
- 3 mm - 3000 µm - 118 mil
- High chemical resistance, electrical conductivity, and open porosity
- Electrode materials for high-temperature batteries
LOCTITE ABLESTIK NCA 2280
- Non-conductive
- Fast cure at low temperature
- High thixotropic index
ABchimie DVP Permanent Coating Stripper
- Designed for controlled application
- Strong solvency
- Easy to apply and remove
