LOCTITE ECCOBOND UV8800M
Harmonization Code : 3907.30.00.85 | Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
- UV Cure
- Cures rapidly
- Excellent adhesion
Product Description
LOCTITE UV8800M epoxy encapsulant is developed to meet high temperature thermal cycling specifications. It UV cures to form a hard translucent coating when exposed to UV light of sufficient intensity. The curing of the product is not inhibited by oxygen, resulting in excellent surface cure.
LOCTITE UV8800M exhibits viscosity characteristics and dearated condition that make it suitable for accurate dispensing with excellent shape control. This encapsulant is typically used for CSP and BGA packages and is, among others, used on Glass, Epoxy, Polyimide and Polyester substrates.
UV Cure Condition
Medium pressure mercury lamp:
- Light Dose, mW/cm² 100
- Exposure Time, seconds 2
- UV radiation, , nm (UVA) 315 to 400
UV8800M
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 12 weeks
Shipping in 12 weeks
Shipping in 12 weeksPackaging
TDS, SDS & Technical Documents
- LOCTITE ECCOBOND UV8800M
- LOCTITE ECCOBOND UV 8800M
Technical Specifications
General Properties
Thermal Properties
Physical Properties
Additional Information
LOCTITE UV8800M can be cured by irradiation with ultraviolet and visible light as well as LED-UV light with single wavelength distribution of sufficient intensity. Cure rate and depth of cure depend on the intensity, spectral distribution of the light source, exposure time and light transmittance of the substrate through which the light must pass.
Recently viewed products
Hysol GR825-73B | Black Epoxy Mold Compound
- MSL 1 260°C
- Designed for SOIC, SOP, SSOP & QSOP
- Ideal for NiPdAu (PPF) & Ag-spot leadframes
LOCTITE ABLESTIK ABP 8068TA
- Excellent workability
- Dispensable
- Printable
LINQSOL EMC-1533 | Black Epoxy Molding Compound
- Green molding compound
- Designed for transistor outline (TO) and double decawatt (D2PAK) packages
- Excellent workability, low water absorption, low modulus, and excellent thermal stability
A675-100 | PMDGM adhesion promoter Additive
- Versatile
- Adhesion promoter
- Pyromellitic Dianhydride Glycerol Dimethacrylate Adduct
LOCTITE ECCOBOND UF8830S
- High purity
- Improved toughness
- Good flow with self filleting
HT 10000-R | One part Hybrid Thermal Gel
- Dark Gray
- 10 Thermal Conductivity
- Good dispense rate
SAC125N | PbFree Solder Spheres
- Lead-Free Solder Spheres
- Lowest cost Sn/Ag/Cu Alloy
- Nickel Dopped, hence the SACNi name
LINQCELL GDP210-MP | 210um Carbon Paper
- 0.21mm - 210um - 8.2mil
- Treated at 1600°C
- With MPL and Hydrophobic coating
